Waterproofing Systems

LATICRETE® 9235 Waterproofing Membrane
LATICRETE 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.
LATICRETE 9235 Waterproofing Membrane is accepted by IAPMO and ICC for shower pans, meets ANSI A118.10 and ANSI A118.12, is non-hazardous and meets all V.O.C. requirements. When anti-fracture treatment is required in wet areas, LATICRETE 9235 Waterproofing Membrane provides the complete package. You only need one product to protect your floor from water damage and substrate cracks. Inhibits the growth of stain-causing mold and mildew in membranes with Microban® antimicrobial product protection. ASTM C627 Rated "Extra Heavy" Service.
Uses:

  • Swimming pools, fountains & water features
  • Shower pans, stalls and tub surrounds
  • Bathrooms & laundries (industrial, commercial & residential)
  • Spas, hot tubs
  • Kitchens & Food Processing Areas
  • Terraces & balconies over unoccupied spaces
  • Countertops
  • Facades
  • Steam rooms (when used in conjunction with a vapor barrier)

Data Sheet

                                                 
     

    LATICRETE® Hydro Ban™
    LATICRETE Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. LATICRETE Hydro Ban is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates.

    • Allow for flood testing in 2 hours at 70°F (21°C) or higher*
    • Does not require the use of fabric.**
    • Bonds directly to metal and PVC plumbing fixtures only.
    • Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured.
    • Changes in color from a light sage to an olive green when cured.
    • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks.
    • "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
    • Exceeds ANSI A118.10 and A118.12.
    • IAPMO approved.
    • Contains Microban® antimicrobial product protection.
    • Rapid drying for a faster time to tile.
    • Lighter color for ease of inspection.
    • Safe—no solvents and non-flammable.
    • Install tile, brick and stone directly onto membrane.

    Data Sheet

     

    LATICRETE 302 Waterproofing
    LATICRETE 302 Waterproof slurry is a high quality; Polymer fortified  cementitious waterproofing material. This product meets & exceeds requirments for EN l4891 CMOP

    USES
    • Recommended for wall & floor in wet areas such as toilets, bathrooms, and kitchen.
    • Designed for Water tanks waterproofing (For drinking water tanks, need approval as    per local regulations)
    • Recommended for water features, fountains.
    • For Cellar walls
    • For roof top waterproofing.
    • Energy saving reflective waterproof coating.
    • Balconies and terraces.
    • Sewers.
    • Surface protection for structural concrete (as protection against C02, Chlorides,    Sulphate, Humidity)
    • For Grain Silos.

    Data Sheet